111130 1004 5 neg. 20° TFF-N 45° 0.25 45° CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com Hard plastics · Abrasive materials · Finishing-cut/Thin-cut · Negative > Triple-chip/flat tooth negative Movie MACHINE For portable circular saws, bench- and sizing saws, panel sizing saws, cross-cut saws, cordless saws. Plastics, plexiglass, acrylics, duro- and thermoplastics Mineral/acrylic bound solid boards/kitchen worktops: Corian®, Noblan®, Hi-Macs®, Staron®, Rausolid®, Varicor® HPL High-Pressure-Laminate solid boards/façade panels: Trespa®, Resopal®, Duropal®, Formica®, Kronospan®, Decodur® Gypsum/Cement fiber boards, Rockwool, Eternit, GRP, CRP, HPL, Mineral material Thin iron sheets, sandwich material, composites Thin profiles made of non-ferrous materials like alu, copper, brass OPTIMAL GOOD POSSIBLE APPLICATION Due to special carbide / tooth geometry excellent for finishing cuts in thin plates and profiles made of hard plastics (thermoplastics) such as: PVC, PE, PA, ABS, PS, POM PC, PMMA e.g. hollow section boards of PMMA (acrylic glass). Also good for abrasive, heavy machining and abrading materials such as: GRP, CRP, fiber cement panels, gypsum, fiber boards, eternit. Also excellent for sandwich materials with thin layers. Maximum layer thickness for non-ferrous-metals / plastics = 1.0 mm Maximum layer thickness iron sheet metal = 0.3 mm Excellent also for thin profiles up to 1 mm thickness made of non-ferrous metal such as aluminum, copper, brass. Due to thin cutting width little cutting pressure and waste of material. Therefore also ideal for cordless machines. CARBIDE TIPPED CIRCULAR SAW BLADES 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=