1145 TNUX EDP no. Series Geometry Material Grade Coating Grade ISO Part Specification I D s r P M K N S H 90079 TNUX AX AT201 PVD Grade TNUX160404L*-AT201 16.5 9.53 4.76 0.4 • • • • • • 90058 TNUX AX AT201 PVD Grade TNUX160404R*-AT201 16.5 9.53 4.76 0.4 • • • • • • 90059 TNUX AX AT201 PVD Grade TNUX160408L*-AT201 16.5 9.53 4.76 0.8 • • • • • • 90060 TNUX AX AT201 PVD Grade TNUX160408R*-AT201 16.5 9.53 4.76 0.8 • • • • • • * L is for left-handed and R is for right-handed. EDP no. Series Geometry Material Grade Coating Grade ANSI Part Specification I D s r P M K N S H 90079 TNUX AX AT201 PVD Grade TNUX331L-AT201 0.375 0.375 0.1875 0.016 • • • • • • 90058 TNUX AX AT201 PVD Grade TNUX331R-AT201 0.375 0.375 0.1875 0.016 • • • • • • 90059 TNUX AX AT201 PVD Grade TNUX332L-AT201 0.375 0.375 0.1875 0.031 • • • • • • 90060 TNUX AX AT201 PVD Grade TNUX332R-AT201 0.375 0.375 0.1875 0.031 • • • • • • * L is for left-handed and R is for right-handed. Feed (in/rev) Depth of Cut (in) EDP no. ANSI Part Specification Min. Max. Recommended Min. Max. Recommended 90079 TNUX331L-AT201 0.004 0.016 0.004 0.02 0.24 0.13 90058 TNUX331R-AT201 0.004 0.016 0.004 0.02 0.24 0.13 90059 TNUX332L-AT201 0.004 0.016 0.004 0.02 0.24 0.13 90060 TNUX332R-AT201 0.004 0.016 0.004 0.02 0.24 0.13 Feed (mm/rev) Depth of Cut (mm) EDP no. ISO Part Specification Min. Max. Recommended Min. Max. Recommended 90079 TNUX160404L-AT201 0.10 0.40 0.25 0.50 6.00 3.25 90058 TNUX160404R-AT201 0.10 0.40 0.25 0.50 6.00 3.25 90059 TNUX160408L-AT201 0.10 0.40 0.25 0.50 6.00 3.25 90060 TNUX160408R-AT201 0.10 0.40 0.25 0.50 6.00 3.25 TNUX160404 L TNUX160404 L TNUX160408 L TNUX160408 L TNUX160404 R TNUX160404 R TNUX160408 R TNUX160408 R UNIVERSAL CARBIDE INSERTS Recommended • •Suitable 1. SELECT YOUR INSERT – based on geometry, dimensions and material 2. CHECK THE CUTTING CONDITIONS – for the selected insert 3. CHECK THE CUTTING SPEED – to ensure optimum performance Please refer to page 1130 to check the cutting speed. 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=