KA35 SILVER-MAG ∙ TWIN SLIDE 208013 218013 228013 1157 1 = 450 rpm 5/32 to 1-3/8" 12-35 mm 3/16 to 45/64" 3-18 mm 3/8 to 1-3/16" 10-30 mm 302-429, 448-462 568 610-645 463-465, 470 4" 110 mm * I I Gear stages EUROPE-VERSION 230 VOLTS USA-VERSION 110 VOLTS UK-VERSION 110 VOLTS Special Characteristics Included Accessories – safety belt – 3 hex keys – 2 rubber seals – coolant bottle with hose Motor Power Watts 1100 Tool holder Directly Weldon 3/4" (19 mm) Coolant supply Internal, automatically Stroke 4-23/32" up to 8-17/64" possible 120 mm up to 210 mm possible Voltage 110 Volts / 230 Volts Magnetic adhesion 2200 lb | 1000 kg Magnetic foot 3-1/8 × 6-1/2" (80 × 168 mm) Fixed Weight 23.00 lb 10.50 kg Thanks to Two-way sliding System stroke up to 8-17/64" (210 mm) possible. (Description on page 1158). The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. * The machines are supplied as standard with 2" (55 mm) cutting depth holder. Please use our 2-part pins (explanation see page 310) for cutters from 45/64" (18 mm) if you need cutting depth up to 4" (110 mm). Pre-drill recommended 5/16" (8 mm) 10-13/16" (275 mm) Overall length 14-1/2 to 21-5/8" (370-550 mm) Overall height 4-59/64" (125 mm) Overall width measured on pinion drive* Bestseller Speed full load Core drilling Twist drilling Countersinking Accessories Movie * PREMIUM 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=