KA50 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL SLIDE 208023010 208023020 208023030 1166 1 = 250 rpm 2 = 450 rpm 5/32 to 1-31/32" 12-50 mm 3/16 to 29/32" 3-23 mm 3/8 to 1-37/64" 10-40 mm 4" 110 mm * 302-429, 448-462 568 610-645 463-465, 470 I I EUROPE-VERSION 230 VOLTS USA-VERSION 110 VOLTS UK-VERSION 110 VOLTS Speed full load Gear stages Core drilling Twist drilling Countersinking Accessories Special Characteristics Motor Power Watts 1150 Tool holder Morse taper 2 with Weldon 3/4" (19 mm) Coolant supply Internal, automatically Stroke 6-5/8" | 170 mm Voltage 110 Volts / 230 Volts Magnetic adhesion 2755 lb | 1250 kg Magnetic foot 3-5/16 × 7-1/16" (85 × 180 mm) Fixed Weight 28.00 lb 13.00 kg 4-23/32" (120 mm) Overall width measured on pinion drive* The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. Pre-drill recommended 5/16" (8 mm) Sensor * The machines are supplied as standard with a 2" (55 mm) cutting depth holder. For cutting depth up to 4" (110 mm) please use our extra long holders see pages 464/465, or see our 2-part pins (explanation see page 310) for cutters from 45/64" (18 mm). For cutting depth more than 4" (110 mm) please ask us. Bestseller 11" (280 mm) Overall length 16-1/2 to 22" (420-560 mm) Overall height Movie Thanks to the Heavy Duty Twin Rail Slide System, 4" (110 mm) cutting depth is easily possible. (Description on page 1158). KA 50 BLUE-MAG ∙ SENSOR ∙ TWIN-RAI SLIDE * PROFESSIONAL 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=