KATV55 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL SLIDE 208025010 208025020 208025030 1168 1 = 100-250 rpm 2 = 180-450 rpm 5/32 to 2-11/64" 12-55 mm 3/16 to 29/32" 3-23 mm 3/8 to 1-37/64" 10-40 mm 15/64 to 25/32" 6-20 mm 569 I I 302-429, 448-462 568 610-645 463-465, 470 4" 110 mm * VARIABLE SPEED EUROPE-VERSION 230 VOLTS USA-VERSION 110 VOLTS UK-VERSION 110 VOLTS Special Characteristics Motor Power Watts 1250 Tool holder Morse taper 2 with Weldon 3/4" (19 mm) Coolant supply Internal, automatically Stroke 6-5/8" | 170 mm Voltage 110 Volts / 230 Volts Magnetic adhesion 2755 lb | 1250 kg Magnetic foot 3-5/16 × 7-1/16" (85 × 180 mm) Fixed Weight 28.00 lb 13.00 kg Right/left running Full wave electronic Thermal/overheat protection STOP Speed full load Gear stages Core drilling Twist drilling Countersinking Accessories Tapping 4-23/32" (120 mm) Overall width measured on pinion drive* The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. Pre-drill recommended 3/8" (10 mm) Sensor Bestseller Movie Constant torque forward and reverse with built in time delay for motor start. Gives motor and gearbox protection when switching from forward to reverse when tapping or reaming. 11" (280 mm) Overall length 16-1/2 to 22" (420-560 mm) Overall height * The machines are supplied as standard with a 2" (55 mm) cutting depth holder. For cutting depth up to 4" (110 mm) please use our extra long holders see pages 464/465, or see our 2-part pins (explanation see page 310) for cutters from 45/64" (18 mm). For cutting depth more than 4" (110 mm) please ask us. Thanks to the Heavy Duty Twin Rail Slide System, 4" (110 mm) cutting depth is easily possible. (Description on page 1158). KATV 55 BLUE-MAG ∙ SENSOR ∙ TWIN-RA L SLIDE * PROFESSIONAL 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=