KATV140 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL SLIDE 208032010 208032020 208032030 1175 1 = 30-80 rpm 2 = 50-120 rpm 3 = 130-350 rpm 4 = 210-550 rpm I I 15/32 to 5-33/64" 12-140 mm 3/16 to 1-31/32" 3-50 mm 3/8 to 3-5/32" 10-80 mm 15/64 to 1-47/64" 6-44 mm 9-27/32" 240 mm * 569 302-429, 448-462 568 610-645 463-465, 470 EUROPE-VERSION 230 VOLTS USA-VERSION 110 VOLTS UK-VERSION 110 VOLTS Motor Power Watts 2300 Accessories in machine Adapter weldon 1-1/4" (32 mm) to 3/4" (19 mm) For annular cutter 5/32 to 2-23/64" (12-60 mm) Morse taper 4 with weldon 1-1/4" (32 mm) For annular cutter 2-13/32 to 5-33/64" (61-140 mm) Coolant supply Internal, automatically Stroke 12" | 320 mm Voltage 110 Volts / 230 Volts Magnetic adhesion 5897 lb | 2675 kg Magnetic foot 4-11/16 × 9-7/16" (120 × 240 mm) Fixed Weight 73.00 lb 35.00 kg Special Characteristics Mechanical clutch Right/left running Full wave electronic Thermal/overheat protection STOP Speed full load Gear stages Core drilling Twist drilling Countersinking Accessories Tapping 9-1/16" (230 mm) Overall width measured on pinion drive* The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. Pre-drill recommended 1/2" + 1/2" (12 mm + 12 mm) Sensor Bestseller Movie 21-7/8 to 33-11/16" (556-857 mm) Overall height 17-5/8" (440 mm) Overall length VARIABLE SPEED * The machines are supplied as standard with a 2" (55 mm) cutting depth holder. For cutting depth up to 4" (110 mm) please use our extra long holders see pages 464/465, or see our 2-part pins (explanation see page 310) for cutters from 45/64" (18 mm). For cutting depth more than 4" (110 mm) please ask us. Thanks to the Heavy Duty Twin Rail Slide System, 9-7/16" (240 mm) cutting depth is easily possible. (Description on page 1158). KATV 140 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL S IDE * SPECIALIST 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=