201285U 201285U 201427 201439 201285u018 201285u019 201285u020 201285u021 201285u022 201285u023 201285u024 201285u025 201285u026 201285u027 201285u028 201285u029 201285u030 201285u032 201285u033 201285u034 201285u035 201285u036 201285u038 201285u040 201285u045 201285u046 201285u050 350 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm Weldon Weldon 19 mm 80 mm 1428 Art. mm I 18 I 19 I 20 I 21 I 22 I 23 Art. mm I 24 I 25 I 26 I 27 I 28 I 29 Art. mm I 30 I 32 I 33 I 34 I 35 I 36 Art. mm I 38 I 40 I 45 % 46 I 50 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com EJECTOR PINS 2-PIECE APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 1-31/32" (50 mm) cutting depth. Then remove piece 2 and continue drilling. HSS-XE annular cutter, Weldon shank, drill depth 80 mm Further see Art. 20 1650 page 310 and Art. 20 1660 page 312. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 1-31/32" (50 mm). If no extra-long holders are used (e.g. as on pages 464–465 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), then you need to use 2-part ejector pins for drill depths above 1-31/32" (50 mm). Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Gray cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 464– 465). You can drill as deep as 4-21/64" (110 mm) in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 2 piece 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES % Sale item. Hardox 400, 450 Cutting data Movie < 900 N < 900 N < 10% Si GOLD-DRILL LINE 80 GOLD-DRILL LINE 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=