201280U 201280U 201428 201399 201280u018 201280u019 201280u020 201280u021 201280u022 201280u023 201280u024 201280u025 201280u026 201280u027 201280u028 201280u029 201280u030 201280u032 201280u033 201280u035 201280u036 201280u038 201280u040 201280u045 201280u050 352 I 7.98 × 157 mm 1 2 I 7.98 × 160 mm 1 2 Weldon Weldon 19 mm 110 mm Art. mm I 18 I 19 I 20 I 21 I 22 I 23 Art. mm I 24 I 25 I 26 I 27 I 28 I 29 Art. mm I 30 I 32 I 33 I 35 I 36 I 38 Art. mm I 40 I 45 I 50 1428 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com EJECTOR PINS 2-PIECE APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 1-31/32" (50 mm) cutting depth. Then remove piece 2 and continue drilling. 2 piece HSS-XE annular cutter, Weldon shank, drill depth 110 mm Further see Art. 20 1660 page 312. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 1-31/32" (50 mm). If no extra-long holders are used (e.g. as on pages 464–465 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), then you need to use 2-part ejector pins for drill depths above 1-31/32" (50 mm). Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Gray cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 464– 465). You can drill as deep as 4-21/64" (110 mm) in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Hardox 400, 450 Cutting data Movie < 900 N < 900 N < 10% Si GOLD-DRILL LINE 110 GOLD-DRILL LINE 110 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=