201925 201925 201427 201439 201925025 201925030 201925035 201925040 201925045 201925050 201925055 201925060 201925065 201925070 201925075 201925080 201925085 201925090 201925095 201925100 201925105 201925110 201925115 201925120 201925125 201925130 201925135 358 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm Weldon Weldon 3/4" 3" Inch Art. I 11/16" I 3/4" I 13/16" I 7/8" I 15/16" I 1" Inch Art. I 1-1/16" I 1-1/8" I 1-3/16" I 1-1/4" I 1-5/16" I 1-3/8" Inch Art. I 1-7/16" I 1-1/2" I 1-9/16" I 1-5/8" I 1-11/16" I 1-3/4" Inch Art. I 1-13/16" I 1-7/8" I 1-15/16" I 2" I 2-1/16" 1 1 1428 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com HSS-XE annular cutter, Weldon shank, drill depth 3" APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 1-31/32" (50 mm) cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 1-31/32" (50 mm). If no extra-long holders are used (e.g. as on pages 464–465 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), then you need to use 2-part ejector pins for drill depths above 1-31/32" (50 mm). EJECTOR PINS 2-PIECE 2 piece Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Gray cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 464– 465). You can drill as deep as 4-21/64" (110 mm) in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Hardox 400, 450 Cutting data Movie < 900 N < 900 N < 10% Si GOLD-DRILL LINE INCH 80 GOLD-DRILL LINE INCH 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=