201670 201670 201427 201439 201670025 201670030 201670035 201670040 201670045 201670050 201670055 201670060 201670065 201670070 201670075 201670080 201670085 201670090 201670095 201670100 201670105 201670110 201670115 201670120 201670125 201670130 201670135 390 Nitto / Universal Nitto / Universal 3/4" 3" 1 2 I 7.98 × 130 mm 1 2 E H I N H I 7.98 × 130 mm Inch Art. I 11/16" I 3/4" I 13/16" I 7/8" I 15/16" I 1" Inch Art. I 1-1/16" I 1-1/8" I 1-3/16" I 1-1/4" I 1-5/16" I 1-3/8" Inch Art. I 1-7/16" I 1-1/2" I 1-9/16" I 1-5/8" I 1-11/16" I 1-3/4" Inch Art. I 1-13/16" I 1-7/8" I 1-15/16" I 2" I 2-1/16" 1427 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com Carbide-tipped annular cutter, Nitto/Universal shank, drill depth 3" APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 1-31/32" (50 mm) cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 1-31/32" (50 mm). If no extra-long holders are used (e.g. as on pages 464–465 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), then you need to use 2-part ejector pins for drill depths above 1-31/32" (50 mm). EJECTOR PINS 2-PIECE 2 piece Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Gray cast iron Hastelloy, Inconel, exotic materials APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 464– 465). You can drill as deep as 4-21/64" (110 mm) in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Cutting data Movie < 1400 N > 900 N > 10% Si HARD-L INE INCH 80 HARD-L INE INCH 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=