201185N 201185N 201427 201439 201185N018 201185N019 201185N020 201185N021 201185N022 201185N023 201185N024 201185N025 201185N026 201185N027 201185N028 201185N029 201185N030 201185N032 201185N033 201185N035 201185N036 201185N038 201185N040 201185N045 201185N050 398 Nitto / Universal Nitto / Universal 19 mm 80 mm 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm Art. mm % 18 % 19 % 20 % 21 % 22 % 23 Art. mm % 24 % 25 % 26 % 27 % 28 % 29 Art. mm % 30 % 32 % 33 % 35 % 36 % 38 Art. mm % 40 % 45 % 50 1428 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com HSS-XE + DURABLUE-coated annular cutter, Nitto/Universal shank, drill depth 80 mm EJECTOR PINS 2-PIECE APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 1-31/32" (50 mm) cutting depth. Then remove piece 2 and continue drilling. 2 piece Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 1-31/32" (50 mm). If no extra-long holders are used (e.g. as on pages 464–465 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), then you need to use 2-part ejector pins for drill depths above 1-31/32" (50 mm). Larger see Art. 20 1650 page 310 and Art. 20 1660 page 312 – Replacement article see Art. 20 1285N page 414, Art. 20 1650N page 382. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Gray cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 464– 465). You can drill as deep as 4-21/64" (110 mm) in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES % Sale item. Hardox 400, 450 Cutting data Movie < 1100 N < 900 N > 10% Si BLUE-DRILL LINE 80 BLUE-DRILL LINE 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=