201285N 201285N 201427 201439 201285N018 201285N019 201285N020 201285N021 201285N022 201285N023 201285N024 201285N025 201285N026 201285N027 201285N028 201285N029 201285N030 201285N032 201285N033 201285N035 201285N036 201285N038 201285N040 201285N045 201285N050 414 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm Nitto / Universal Nitto / Universal 19 mm 80 mm Art. mm I 18 I 19 I 20 I 21 I 22 % 23 Art. mm I 24 I 25 I 26 I 27 I 28 I 29 Art. mm I 30 I 32 % 33 I 35 % 36 % 38 Art. mm I 40 % 45 I 50 1428 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com HSS-XE annular cutter, Nitto/Universal shank, drill depth 80 mm APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 1-31/32" (50 mm) cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 1-31/32" (50 mm). If no extra-long holders are used (e.g. as on pages 464–465 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), then you need to use 2-part ejector pins for drill depths above 1-31/32" (50 mm). EJECTOR PINS 2-PIECE 2 piece Smaller from 14mm see Art. 20 1650N page 384. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Gray cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 464– 465). You can drill as deep as 4-21/64" (110 mm) in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES % Sale item. Hardox 400, 450 Cutting data Movie < 900 N < 900 N < 10% Si GOLD-DRILL LINE 80 GOLD-DRILL LINE 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=