201280N 201280N 201428 201399 201280N018 201280N019 201280N020 201280N021 201280N022 201280N023 201280N024 201280N025 201280N026 201280N027 201280N028 201280N029 201280N030 201280N032 201280N033 201280N035 201280N036 201280N038 201280N040 201280N045 201280N050 416 1 2 I 7.98 × 157 mm 1 2 I 7.98 × 160 mm Nitto / Universal Nitto / Universal 19 mm 110 mm Art. mm I 18 I 19 I 20 I 21 I 22 I 23 Art. mm I 24 I 25 I 26 I 27 I 28 I 29 Art. mm I 30 I 32 I 33 I 35 I 36 I 38 Art. mm I 40 I 45 I 50 1428 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com HSS-XE annular cutter, Nitto/Universal shank, drill depth 110 mm EJECTOR PINS 2-PIECE APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 1-31/32" (50 mm) cutting depth. Then remove piece 2 and continue drilling. 2 piece Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 1-31/32" (50 mm). If no extra-long holders are used (e.g. as on pages 464–465 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), then you need to use 2-part ejector pins for drill depths above 1-31/32" (50 mm). Smaller from 14mm see Art. 20 1660N page 384. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Gray cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 464– 465). You can drill as deep as 4-21/64" (110 mm) in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Hardox 400, 450 Cutting data Movie < 900 N < 900 N < 10% Si GOLD-DRILL LINE 110 GOLD-DRILL LINE 110 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=