201015 201015A 512 30 mm 1" 30 mm 1" HOLE SAWS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com Handheld machines Maximum recommended 100 mm Maximum recommended cutting depth 15 mm Maximum possible cutting depth 30 mm Stationary and core drilling machines Maximum recommended 120 mm Maximum recommended cutting depth 20 mm Maximum possible cutting depth 30 mm PROPERTIES 514 ACCESSORIES APPLICATION APPLICATION Alu Alu Steel Steel Stainless Stainless Copper, brass, tin Copper, brass, tin Plastics GRP/CRP Plastics GRP/CRP Sandwich materials Sandwich materials Gray cast iron Gray cast iron Carbide tipped hole saw, drill depth 30 mm | 1". Complete with shank, center drill and ejector spring Carbide tipped hole saw, drill depth 30 mm | 1". Hole saw body only Also ideal for drilling pipes 3.0 mm Cutting width Shank 14-120 mm = 13 mm Ejector spring Center drill TiALN coated comes with cross grinding for centering without running off (center punching not neccessary) Make your hole saw a universal tool for almost all type of machines. Choose from the accessories (see pages 514-515) your suitable shank. Extra heavy construction → All hole saws includes an exchangeable shank and drill → Quick removal of drilled core through ejector spring for hole saws 17–120 mm → Quick removal of drilled core possible from 14 mm see Power-Drill 4000 System see page 510 Application note: For material thickness over 6 mm it is necessary to lift the drill and remove the chips several times. If drilling maximum cutting depth please remove the ejector spring. Use recommended cutting oil for metals (see from page 1233). < 1400 N > 900 N > 10% Si < 1400 N > 900 N > 10% Si POWER-MAX HEAVY-DUTY 20 POWER-MAX HEAVY-DUTY 20 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=