201015A 201134 201445 201137 201446 201123 201446 201531 201530 514 13 mm 14-60 mm I I 61-120 mm I I SDS PLUS SDS PLUS 14-120 mm I I 13 mm 6 × 80 mm POWER-DRILL 4000 6.34 × 80 mm 13 mm I 14-120 mm I 1 3 4 2 8 × 80 mm 8 × 80 mm HOLE SAWS CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com Spare parts for Power-Drill 4000 see page 546 Do not use hammer-function. Spare ejector drill SHANKS WITH SUITABLE CENTER DRILL / SPRINGS SHANK WITH SUITABLE CENTER DRILL / SPRING Operating mode: A. Center punch the workpiece. Soft materials such as plastics, wood and wood based materials can possibly be done without the center punch. B. Place the ejector drill 1 in the middle of the center mark. Use little pressure (feed rate) until the hole saw reaches a minimum cutting depth of 0.5 mm. The hole saw in self-centered now. Feed rate can be increased. C. An ejector spring 2 which is installed in the arbor puts pressure on the ejector drill 1. D. The ejector drill 1 ejects the core 4 after drilling process. (If the core will not be ejected, please increase the spring pressure on the ejector drill by turning the Allen screw 3 clockwise). Advantages: 1. After each drilling process the core will be ejected. 2. Fits all POWER-MAX hole saw diameters from 14 mm (page 506). 3. Since the ejector drill does not drill through the material (as usual with hole saw with center drills), a continuous drilling operation is possible. Most hole saws 'crash' into the material and can cause tooth fracture. This system allows for constant motion through the hole which helps prevent tooth fracture from happening. Movie ACCESSORIES FOR HANDHELD MACHINES POWER-MAX HEAVY-DUTY 20 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=