211510 211510 211510005 211510006 211510008 211510010 211510012 211510014 211510016 211510018 210060 544 8.5mm 5mm = 30mm 6–18mm = 40mm __________________________________ 13/64" = 1-3/16" 15/64 to 45/64" = 1-37/64" I 5 13/64" I 6 15/64" I 8 5/16" I 10 25/64" I 12 15/32" I 14 35/64" I 16 9/16" I 18 45/64" 21 1510 5-85 mm I CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com DIAMOND GRIT HOLE SAWS APPLICATION Diamond-grit hole saw, drill depth 30 mm / 40 mm | 1-3/16" / 1-37/64" Plastics, plexiglass, fiberglass Porcelain, stone Ceramic, wall tiles, stoneware tiles Brick & Masonry Glass Attention: The inch sizes do not correspond exactly to the mm diameters Art. mm Inch Art. mm Inch Art. mm Inch Art. mm Inch PROPERTIES Due to the 8.5mm shank these hole saws can be used on all conventional drilling machines. Suitable for dry cutting and for wet cutting (cooling with water recommended). All hole saws with diameter of 5–14mm with a special cooling wax filling. The ultimate hole saw for hard-to-cut materials such as: → Hardest-ceramic tiles → All kinds of stones → Porcelain → All types of masonry → Glass → Glass fiber reinforced plastics / carbon fiber reinforced plastics (GRP / CRP) Fixing with a suction cup (on all smooth surfaces) which provides perfect centering for all Dia-Hole saws with diameter 5–85 mm, while horizontal and vertical drilling without offfset of the drill bit. Due to the multidrill guide for larger hole saw diameters no center drill is needed anymore. High wear- and oxidation-resistance because of the galvanized steel frame. ACCESSORIES MULTIDRILL HOLE SAW-GUIDE WITH SUCTION CUP Front side Back side Cutting data Movie 1438 DIAMOND GRIT DIAMOND GRIT 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=