770 SD-51MGDC SD-42MGDC SC-51MGDC SB-43MGDC SC-41MGL2DC SA-51MGDC SA-43MGDC SM-51MGDC SM-43MGDC SL-4MGDC SH-41MGDC SG-51MGDC SG-44MGDC SG-42MGDC SF-42MGDC SE-51MGDC SE-41MGDC SC-42MG DC d2 l1 d1 l2 Recommended ATA Air Tools FEATURES: Deburring to finishing TOOL: Pencil Grinders 1181 CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com PERFORMANCE METRIC RANGE Tool No. Art. Uncoated d1 l2 d2 l1 brazed solid Cylinder SA-43MG D/C 29200 3.0 12.7 3.0 38.0 ✔ SA-43MGL2 D/C 29201 3.0 12.7 3.0 50.0 ✔ SA-51MG D/C E/C 29202 6.3 12.7 3.0 45.0 ✔ Cylinder with End Cut SB-43MGDC 29203 3.0 14.0 3.0 38.0 ✔ Cylinder Shape with Radius End SC-41MG D/C 29204 2.3 11.0 3.0 38.0 ✔ SC-41MGL2 D/C 29205 2.3 11.0 3.0 50.0 ✔ SC-42MG D/C 29206 3.0 14.0 3.0 38.0 ✔ SC-42MGL2 29207 3.0 14.0 3.0 50.0 ✔ SC-42MGL3 D/C 29208 3.0 14.0 3.0 75.0 ✔ SC-51MG D/C 29209 6.3 12.7 3.0 45.0 ✔ Ball Shape SD-42MG D/C 29210 3.0 2.8 3.0 38.0 ✔ SD-51MG D/C 29224 6.3 5.0 3.0 38.0 ✔ Oval Shape SE-41MG D/C 29225 3.0 5.5 3.0 38.0 ✔ SE-51MG D/C 29211 6.3 9.5 3.0 41.0 ✔ Tree Shape with Radius End SF-42MG D/C 29212 3.0 12.7 3.0 38.0 ✔ SF-42MGL2 D/C 29213 3.0 12.7 3.0 50.0 ✔ SF-51MG D/C 29214 6.3 12.7 3.0 45.0 ✔ Tree Shape with Pointed End SG-42MG D/C 29215 3.0 14.0 3.0 38.0 ✔ SG-44MG D/C 29216 3.0 12.7 3.0 38.0 ✔ SG-51MG D/C 29217 6.3 12.7 3.0 45.0 ✔ Flame Shape SH-41MG D/C 29218 3.0 6.3 3.0 38.0 ✔ Cone Shape SM-42MG D/C 29220 3.0 11.0 3.0 38.0 ✔ SM-43MG D/C 29221 3.0 16.0 3.0 38.0 ✔ SM-51MG D/C 29223 6.3 12.7 3.0 48.0 ✔ INCH RANGE Tool No. Art. Uncoated d1 l2 d2 l1 brazed solid Cylinder SA-43G D/C 19200 1/8 9/16 1/8 1-1/2 ✔ SA-43GL2 D/C 19201 1/4 1/2 1/8 2 ✔ SA-51G D/C E/C 19202 1/4 1/2 1/8 2 ✔ Cylinder with End Cut SB-43GDC 19203 3/8 3/4 1/4 2-1/2 ✔ Cylinder Shape with Radius End SC-41G D/C 19204 1/2 1 1/4 2-3/4 ✔ SC-41GL2 D/C 19205 1/8 9/16 1/8 1-1/2 ✔ SC-42G D/C 19206 3/32 7/16 1/8 1-1/2 ✔ SC-42GL2 19207 1/8 9/16 1/8 1-1/2 ✔ SC-42GL3 D/C 19208 1/8 9/16 1/8 2 ✔ SC-51G D/C 19209 1/8 9/16 1/8 3 ✔ Ball Shape SD-42G D/C 19210 1/4 1/2 1/8 2 ✔ SD-51G D/C 19224 3/8 3/4 1/4 2-1/2 ✔ Oval Shape SE-41G D/C 19225 1/2 1 1/4 2-3/4 ✔ SE-51G D/C 19211 3/8 3/4 1/4 2-1/2 ✔ Tree Shape with Radius End SF-42G D/C 19212 1/2 1 1/4 2-3/4 ✔ SF-42GL2 D/C 19213 1/8 3/32 1/8 1-1/2 ✔ SF-51G D/C 19214 1/4 7/32 1/8 1-3/4 ✔ Tree Shape with Pointed End SG-42G D/C 19215 3/8 5/16 1/4 2-1/16 ✔ SG-44G D/C 19216 1/2 7/16 1/4 2-3/16 ✔ SG-51G D/C 19217 1/8 7/32 1/8 1-1/2 ✔ Flame Shape SH-41G D/C 19218 1/4 3/8 1/8 1-7/8 ✔ Cone Shape SM-42G D/C 19220 1/2 7/8 1/4 2-5/8 ✔ SM-43G D/C 19221 1/8 1/2 1/8 1-1/2 ✔ SM-51G D/C 19223 1/4 1/2 1/8 2 ✔ G2000 Features & Benefits - G2000 FEATURES BENEFITS Designed for aerospace Outperform standard cuts in complex alloys Good finish & high stock removal Respond to complex application Specific rake angle Suitable for very hard material and increase life while keeping sharpness 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=