774 FEATURES • Special cut style • Up cut • Down cut BENEFITS • Best for roughing and contouring composite • Can be used with hand-held tools or CNC machines • Can be used on various materials, from large fiberglass panels to small parts made of composite APPLICATIONS • Trimming • Routing • Pocketing INDUSTRY TARGETS • Aerospace • Automotive • Railway Fiberglass Routers d2 l1 d1 l2 RECOMMENDATIONS • The routers are recommended for use on phenolics, fiberglass and hard non-metallic materials • For the best results, FGRs should be rigidly mounted in accurate collet chucks APPLICATIONS • Trimming • Routing • Pocketing CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com METRIC RANGE Tool No. d1 l2 d2 l1 solid No End Cut With End Cut Endmill Drill Point FGR-1M 1.6 5.0 3.0 38.0 ✔ 83001 83015 83030 83045 FGR-1-1M 2.4 9.5 3.0 38.0 ✔ 83002 83016 83031 83046 FGR-2M 3.0 12.0 3.0 38.0 ✔ 83003 83017 83032 83047 FGR-3M 4.0 16.0 4.0 50.0 ✔ 83004 83018 83033 83048 FGR-4M 4.0 16.0 6.0 50.0 ✔ 83005 83019 83034 83049 FGR-5M 6.0 19.0 6.0 50.0 ✔ 83006 83020 83035 83050 FGR-6M 6.0 19.0 6.0 63.0 ✔ 83007 83021 83036 83051 FGR-6-1M 6.0 25.0 6.0 75.0 ✔ 83008 83022 83037 83052 FGR-7M 8.0 25.0 8.0 63.0 ✔ 83009 83023 83038 83053 FGR-8M 10.0 25.0 10.0 75.0 ✔ 83010 83024 83039 83054 FGR-9M 12.0 25.0 12.0 75.0 ✔ 83011 83025 83040 83055 INCH RANGE Tool No. d1 l2 d2 l1 solid No End Cut With End Cut Endmill Drill Point FGR-1 1/16 3/16 1/8 1-1/2 ✔ 73001 73015 73030 73045 FGR-1-1 3/32 3/8 1/8 1-1/2 ✔ 73002 73016 73031 73046 FGR-2 1/8 1/2 1/8 1-1/2 ✔ 73003 73017 73032 73047 FGR-3 3/16 5/8 3/16 2 ✔ 73004 73018 73033 73048 FGR-4 3/16 5/8 1/4 2 ✔ 73005 73019 73034 73049 FGR-5 1/4 3/4 1/4 2 ✔ 73006 73020 73035 73050 FGR-6 1/4 3/4 1/4 2-1/2 ✔ 73007 73021 73036 73051 FGR-6-1 1/4 1 1/4 3 ✔ 73008 73022 73037 73052 FGR-7 5/16 1 5/16 2-1/2 ✔ 73009 73023 73038 73053 FGR-8 3/8 1 3/8 2-1/2 ✔ 73010 73024 73039 73054 FGR-9 1/2 1 1/2 3 ✔ 73011 73025 73040 73055 NO END CUT Used for profile applications BUR STYLE Used for profiling and slotting application ENDMILL Used for plunging, slotting and profiling applications were a square corner is required DRILL POINT Used for plunging into application prior to starting routing operation INCH AND METRIC RANGES FIBERGLASS ROUTERS 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=