837 FINISHING STOCK REMOVAL Recommended ATA Air Tools RA12M for all 4" and 4-1/2" Flap Discs. RA14 for all 4", 4-1/2 and 5" Flap Discs. RA8 for all 7" Flap Discs. RA1650 for all 4-1/2 and 125mm Flap Discs. Steel High Nickel alloys Cast iron Stainless Non-ferrous metals Paint APPLICATION OPTIMAL GOOD POSSIBLE Steel High Nickel alloys Cast iron Stainless Non-ferrous metals Paint APPLICATION OPTIMAL GOOD POSSIBLE Art. Grit size 24 Grit size 36 Grit size 40 Grit size 60 Grit size 80 ∅ Outer ∅ Bore RPM Unit IPC Code 4" 5/8" – G41416 G41417 G41418 G41419 15,300 10 72 4-1/2" 7/8" G41400 G41401 G41402 G41403 G41404 13,300 10 72 5" 7/8" – G41406 G41407 G41408 G41409 12,000 10 72 7" 7/8" – G41411 G41412 G41413 G41414 8,600 10 72 Below part numbers nclude a threaded hub for the flap discs. 4-1/2" 5/8"-11 – G41901 G41902 G41903 – 13,300 10 72 7" 5/8"-11 – G41911 G41912 G41913 G41914 8,600 10 72 FINISHING STOCK REMOVAL Art. Grit size 36 Grit size 40 Grit size 60 Grit size 80 Grit size 120 ∅ Outer ∅ Bore RPM Unit IPC Code 4" 5/8" – G40110 – – – 15,300 10 G10 4-1/2" 7/8" – G40116 G40118 – G40120 13,300 10 G10 5" 7/8" – – G40124 – – 12,000 10 G10 Below part numbers nclude a threaded hub for the flap discs. 4-1/2" 5/8"-11 G40635 G40636 G40637 G40638 – 13,300 10 G10 ® FLAP DISCS CERAMIQ™ FLAP DISCS (Glass Fiber / Angled) Type 29 CERAMIQ™ flap discs are for aggressive metal removal on difficult to grind and finish materials • Ideal for Steels, Stainless Steel, Carbon Steel, High Nickel Alloys and Titanium Aluminum oxide flap discs are universal discs for Non-Ferrous metals and softer materials • Ideal for use in applications where glazing of zirconium discs is a problem • Aluminum oxide discs offer reduced heat, finer surface finish and rapid stock removal on softer materials ALUMINUM OXIDE FLAP DISCS (Glass Fiber / Flat) Type 27 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=