306432 306432120010024 95 l7 Z r Z r d3 d1 tol. < 6 - 0.025 < 10 - 0.030 < 16 - 0.035 < 20 - 0.040 Z 4 Z 4 Art. d1* r l2 l3 d2 h5 d3 l1 Z % 12.0 1.0 24 – 12 – 83 4 d3 < 10 HA / d3 > 12 HB 1348 END MILLS Solid carbide extreme rapid cutter steel < 700 N/mm2 1. Test Real cutting data Work material 1.7225 Tool 12.0 × 24 r 1.0 Cutting speed 265 m/min. rpm 7.000 Feed rate 6.000 mm/min. Feed per tooth 0.21 mm Width of cut 1.25 mm Depth of cut 20.0 mm Material removal rate 138 cm³/min. 2. Test Real cutting data Work material St 52-3U Tool 12.0 × 24 r 1.0 Cutting speed 150 m/min. rpm 4.780 Feed rate 2.200 mm/min. Feed per tooth 0.12 mm Width of cut 8.0 mm Depth of cut 6.0 mm Material removal rate 105 cm³/min. Plunging speed 700 mm/min. 3. Test Real cutting data Work material 1.2085 Tool 16 × 32 r = 1.0 Cutting speed 120 m/min. rpm 2.355 Feed rate 800 mm/min. GJL GJS STEEL < 1100 N/mm2 HRC < 45 UNI semifinishing short chip long chip GTW GTS roughing MICRO GRAIN KARNASCH NORM N DUO DIN 6535/Shape HA DIN 6535/Shape HB 50° Extrem Rapid Cutting XP-772 Overhang length Cutting speed % Depth of cut % Feed rate % l7 ≤ 4 × d1 100 100 100 l7 ≤ 5 × d1 70 70 80 l7 ≤ 4 × d1 50 50 70 % Sale item. Cutting data Movie Machining details: 1. Conditions must be: rigid machine conditions and excellent holders (shrink fit holder). 2. The stated standard values based on interpolation milling (including corners). 3. Coolant with MMKS [MQL (mist)] or air blow. 4. When dipping in Z-axis, you have to reduce the feed speed by 40-60%. 5. The standard values refer to the length l3 of 3×D. For deeper applications please adjust Cutting speed/depth of cut/Feed rate for the conditions. 6. In order to achieve ideal cutting results you have to consider your local operating conditions. 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=