111130 956 5 neg. 20° TFF-N 45° 0.25 45° CONTACT INFORMATION For more information please call +1 330 928 7744 or send an email to ataorders@atatools.com Aluminum negative thin-cut/finishing-cut APPLICATION Sizing and cross cuts in thin-walled profiles, plates, blocks and rods made of aluminum, brass, copper and plastics (e.g. window profiles). Minimum Lubrication recommended. Because of TFF-N cut: – Almost bur-free finishing-cut quality also at the lower side/exit of the workpiece – Excellent cutting quality at the cut surface (almost mirror finish) – Even better lifetime Due to thin cutting width: – Less waste – Less wear/energy consumption of the machine – With hand-held machines and manual feed much less effort Due to negative cutting angle preferably for manual feed. Automatic feed also possible. Special design for anodized or lacquered aluminum on request. MACHINE Miter and double miter saws, table and sizing saws, cross-cut saws, CNC machining centers, portable circular saws, battery-driven saws > Triple-chip/flat tooth negative Non-ferrous materials like aluminum, copper, brass Plastics, plexiglass, acrylics, duro- and thermoplastics OPTIMAL GOOD POSSIBLE Movie CARBIDE TIPPED CIRCULAR SAW BLADES 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=