ATA International Product Catalogue

107150 107150136010 107150160010 107150180010 107150190010 107150230010 107150250010 107150305010 107150305020 107150355010 107150355020 1066 20 ° 10 ° 0 ° 0 ° WWF 13 ° 0 ° 20 ° 0 ° WWF Art. I 136 1.6/1.2 20/10 30 WWF 2-6-32 - I 160 1.8/1.4 20/16 32 WWF 2-6-32 - I 180 1.8/1.4 30/20 36 WWF UNI 1 - I 190 1.8/1.4 30 38 WWF UNI 1 - I 230/235 2.0/1.6 30/25.4 48 WWF UNI 1 - I 250 2.2/1.8 30/25.4 60 WWF UNI 1 - I 305 2.2/1.8 25.4 60 WWF - - I 305 2.2/1.8 25.4 80 WWF - - I 355 2.2/1.8 25.4 80 WWF - - I 355 2.2/1.8 25.4 90 WWF 1-12-55.4 - CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie Super Dry-Cutter mild steel MACHINE For portable machines, cross-cut saws, panel and sizing saws, mitre saws, table and radial arms saws, battery-driven saws and suitable also for so-called DRY CUTTER machines with reduced speeds such as: Jepson, RIDGID, ELU, RYOBI... For steel, it is beneficial to work at reduced speeds (see table below). Use of cutting spray or Mecut wax increases the service life (coolants see from page 1364) OPTIMAL GOOD POSSIBLE Mild steel > Alternate top bevel+bevel from  250 mm Movie > Alternate top bevel+bevel APPLICATION The focus is on cutting profile material and sheet metal. Profile material from 3 mm up to 8 mm wall thickness and sheet metal from 3 mm up to 10 mm thickness. Please use here the dimension 305 mm with 60 teeth and 355 mm with 80 teeth. For all the remaining dimension we recommend: Profile material from 2 mm up to 6 mm wall thickness and sheet metal form 2 mm up to 8 mm thickness. CERMET teeth (ceramics) approx. doubles the service life as compared to our Dry-Cutter mild steel Art. 10 7100 page 1064. CERMET blades needs stable, complete and vibration-free clamping of the work piece. This is also important for all DRY-CUTTER versions such as Article 10 7100, 10 7130, 10 7300 and 10 7400. See here our recommendation next page 'Tips for cutting different shapes'. For other sizes, see item 10 7100 page 1064 Cutting thin sheet up to approx. 3 mm wall thickness and sandwich material: see item 10 7400 page 1069 Cutting stainless steel up to approx. 4 mm: see item 10 7300 page 1068 Cutting of aluminium profiles/ sheets: see item 10 8000 page 1074 / item 11 1100 page 1083 / item 11 1120 page 1085 Cutting of wood, plastics, non-ferrous metals like aluminium, mild steels: see item 10 8055 page 1071  136-150 mm = 4000-3600 rpm  160-200 mm = 3500-3000 rpm  210-250 mm = 2800-1900 rpm  260-330 mm = 1800-1500 rpm  350-400 mm = 1400-1000 rpm CARBIDE TIPPED CIRCULAR SAW BLADES UNI 1 = 2-7-42 + 2-9-46.4 11 Index 10 9 OIL 8 7 6 5 4 3 2 1