ATA International Product Catalogue

KATV100 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL SLIDE 208029010 208029020 208029030 1302 1 = 60-140 rpm 2 = 200-470 rpm I I  12-100 mm 15/32"-3.15/16" 3-32 mm 3/16"-1.17/64" 10-55 mm 3/8-2.11/64" 6-32 mm 15/64"-1.17/64"     220 mm 8.21/32" * 641 376- 501, 520- 534 640 682- 717 535 -537, 542 EUROPE-VERSION 230 VOLTS USA-VERSION 110 VOLTS UK-VERSION 110 VOLTS Motor Power Watts 1800 Holder in Machine Morse taper 3 with Weldon 19 mm (3/4") for annular cutter  12-60 mm Morse taper for  = 61-100 mm, see accessories, pages 535- 537 Coolant supply Internal, automatically Stroke 255 mm | 10.15/64" Voltage 230 Volts / 110 Volts Magnetic adhesion 2050 kg | 4520 lb Magnetic foot 85 × 180 mm Fixed Weight 20.50 kg 45.00 lb Special Characteristics Mechanical clutch Thanks to 'HEAVY-DUTY' Twin Rail Slide System easily 220 mm cutting depth possible (Description on page 1288) . Right/left running Full wave electronic Thermal/overheat protection Speed full load Core drilling Twist drilling Countersinking Accessories Tapping Gear stages STOP Overall width measured on pinion drive * The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. Pre-drill recommended 12 mm Sensor * The machines are supplied as standard with a 55 mm cutting depth holder. For cutting depth up to 110 mm please use our extra long holders see pages  536/ 537, or see our 2-part pins (explanation see page 384) for cutters from 18 mm. For cutting depth more than 110 mm please ask us. 230 Volt demonstration models available. Please send a mail to sales@atagroup.ie Bestseller – price reduced Constant torque forward and reverse with built in time delay for motor start. Gives motor and gearbox protection when switching from forward to reverse when tapping or reaming. 340 mm Overall length 480-690 mm Overall height Movie VARIABLE SPEED KATV 100 BLUE-MAG ∙ SENSOR ∙ TW N-RAIL SLIDE * PROFESSIONAL 11 Index 10 9 OIL 8 7 6 5 4 3 2 1