ATA International Product Catalogue

221030 2290100095 2290110084 2290100115 2290100130 2290110175 2290100180 2290110305 2290100250 2290110690 2290100360 2290111370 2290100640 2290111750 I 221030023180480  48,0-65,0 mm | 1.8898-2.5591" POSSIBLE  48,0-55,0 mm | 1.8898-2.1654" OPTIMAL I 22900204445 I 221030023180560  56,0-65,0 mm | 2.2047-2.5591" OPTIMAL 2290100095 2290110084 2290100115 2290100130 2290110175 2290100180 2290110305 2290100250 2290110690 2290100360 2290111370 2290100640 2290111750 2210300231802 2210300231803 335 G F l 4 Ø mm d 1 l 1 l 5 l 3 ≈ 5×D 1564-1571 l 3 Max. drill depth l 5 Body-length l 4 REF.-length l 1 Overall length F Morse taper G Pipe tap Oil ring Art. mm | Inch mm | Inch mm | Inch mm | Inch Art. . . . . 231.8 mm 9.1259" 266.7 mm 10.5000" 320.7 mm 12.6260" 465.1 mm 18.3110" 5 1/4" 9 0 . . 231.8 mm 9.1259" 266.7 mm 10.5000" 320.7 mm 12.6260" 465.1 mm 18.3110" 5 1/4" Holders are delivered without inserts including 2× TORX-screws and 1× TORX wrench. For machines without radial/axial coolant supply an oil ring can be mounted on the holder. Details see page 356 MT 2+3 with axial cooling MT 2,3,4,5 – Radial coolant with oil ring Intermediate Morse taper shank ISO 296 type BEK Helical flute Spare Torx-screws and wrench with torque specification  Diameter TORX max. Torque (N/cm) Wrench mm Inch 9.5-11.0 0.3740-0.4331 84 9 0 11.5-12.5 0.4528-0.4921 84 13.0-17.5 0.5118-0.6890 175 9 0 18.0-24.0 0.7087-0.9449 305 9 0 25.0-35.0 0.9843-1.3780 690 9 0 36.0-65.0 1.4173-2.5591 1370 9 1 64.0-114.0 2.5197-4.4882 1750 9 1 MT 2+3 with axial cooling With morse cone 2+3, axial cooling without coolant ring is possible. For this, the thread of the coolant ring (G) must be closed with a screw. Screw for MT 2 = RC 1/16" Screw for MT 3 = RC 1/8" Cutting data Movie SPADE DRILL HOLDERS G 11 Index 10 9 OIL 8 7 6 5 4 3 2 1