ATA International Product Catalogue

221040 2290100095 2290110084 2290100115 2290100130 2290110175 2290100180 2290110305 2290100250 2290110690 2290100360 2290111370 2290100640 2290111750 I 221040066000640  64,0-88,0 mm | 2.5197-3.4646" POSSIBLE  64,0-76,0 mm | 2.5197-2.9921" OPTIMAL I 221040066000780  78,0-88,0 mm | 3.0709-3.4646" OPTIMAL I 22900205715 I 221040068500900  90,0-114,0 mm | 3.5433-4.4882" POSSIBLE  90,0-100,0 mm | 3.5433-3.9370" OPTIMAL I 221040068501020  102,0-114,0 mm | 4.0157-4.4882" OPTIMAL 2290100095 2290110084 2290100115 2290100130 2290110175 2290100180 2290110305 2290100250 2290110690 2290100360 2290111370 2290100640 2290111750 2210300231802 2210300231803 349 G F l 4 Ø mm d 1 l 1 l 5 l 3 ≈ 12×D 1564-1571 l 3 Max. drill depth l 5 Body-length l 4 REF.-length l 1 Overall length F Morse taper G Pipe tap Oil ring Art. mm | Inch mm | Inch mm | Inch mm | Inch Art. . . . . . . 660.0 mm 25.9843" 704.8 mm 27.7480" 776.2 mm 30.5591" 919.1 mm 36.1850" 5 1/2" 9 0 . . . . . . 685.0 mm 26.9685" 739.7 mm 29.1220" 811.2 mm 31.9370" 954.0 mm 37.5591" 5 1/2" Holders are delivered without inserts including 2× TORX-screws and 1× TORX wrench. For machines without radial/axial coolant supply an oil ring can be mounted on the holder. Details see page 356 MT 2+3 with axial cooling MT 2,3,4,5 – Radial coolant with oil ring Intermediate Morse taper shank ISO 296 type BEK Spare Torx-screws and wrench with torque specification  Diameter TORX max. Torque (N/cm) Wrench mm Inch 9.5-11.0 0.3740-0.4331 84 9 0 11.5-12.5 0.4528-0.4921 84 13.0-17.5 0.5118-0.6890 175 9 0 18.0-24.0 0.7087-0.9449 305 9 0 25.0-35.0 0.9843-1.3780 690 9 0 36.0-65.0 1.4173-2.5591 1370 9 1 64.0-114.0 2.5197-4.4882 1750 9 1 Straight flute MT 2+3 with axial cooling Screw for MT 2 = RC 1/16" Screw for MT 3 = RC 1/8" With morse cone 2+3, axial cooling without coolant ring is possible. For this, the thread of the coolant ring (G) must be closed with a screw. Cutting data Movie SPADE DRILL HOLDERS G 11 Index 10 9 OIL 8 7 6 5 4 3 2 1