ATA International Product Catalogue

201660 201660 201428 201486 201304 201660014 201660015 201660016 201660017 201660018 201660019 201660020 201660021 201660022 201660023 201660024 201660025 201660026 201660027 201660028 201660029 201660030 201660031 201660032 201660033 201660034 201660035 201660036 201660037 201660038 201660039 201660040 201660041 201660042 201660043 201660044 201660045 201660046 201660047 201660048 201660049 201660050 201660051 201660052 201660053 201660054 201660055 201660056 201660057 201660058 201660059 201660060 201660061 201660062 201660063 201660064 201660065 201660066 201660067 201660068 201660069 201660070 201660072 201660073 201660074 201660075 201660076 201660078 201660080 201660082 201660085 201660090 201660095 201660100 201660103 201660104 201660105 201660106 201660108 201660110 201660115 201660120 386 7.98 × 157 mm 1 2 7.98 × 168 mm 1 2  14-55 mm Weldon 19 mm | 3/4"  56-120 mm Weldon 32 mm | 1.1/4" Weldon 110 mm | 4" E H I N H 6.34 × 160 mm 1 2 Art.  mm I 14 35/64" I 15 19/32" I 16 5/8" I 17 43/64" I 18 45/64" I 19 3/4" I 20 25/32" I 21 53/64" I 22 55/64" I 23 29/32" I 24 15/16" I 25 63/64" I 26 1.1/32" I 27 1.1/16" I 28 1.7/64" I 29 1.9/64" I 30 1.3/16" I 31 1.7/32" I 32 1.17/64" I 33 1.19/64" Art.  mm I 34 1.11/32" I 35 1.3/8" I 36 1.27/64" I 37 1.29/64" I 38 1.1/2" I 39 1.17/32" I 40 1.37/64" I 41 1.39/64" I 42 1.21/32" I 43 1.11/16" I 44 1.47/64" I 45 1.49/64" I 46 1.13/16" I 47 1.27/32" I 48 1.57/64" I 49 1.59/64" I 50 1.31/32" I 51 2.1/64" I 52 2.3/64" I 53 2.3/32" Art.  mm I 54 2.1/8" I 55 2.11/64" I 56 2.13/64" I 57 2.1/4" I 58 2.9/32" I 59 2.21/64" I 60 2.23/64" I 61 2.13/32" I 62 2.7/16" I 63 2.31/64" I 64 2.33/64" I 65 2.9/16" I 66 2.19/32" I 67 2.41/64" I 68 2.43/64" I 69 2.23/32" I 70 2.3/4" I 72 2.53/64" I 73 2.7/8" I 74 2.29/32" Art.  mm I 75 2.61/64" I 76 2.63/64" I 78 3.5/64" I 80 3.5/32" I 82 3.15/64" I 85 3.11/32" I 90 3.35/64" I 95 3.47/64" I 100 3.15/16" I 103 4.1/16" I 104 4.3/32" I 105 4.9/64" I 106 4.11/64" I 108 4.1/4" I 110 4.21/64" I 115 4.17/32" I 120 4.23/32" 1557  18-55 mm  56-120 mm I I  14-17 mm I ANNULAR CUTTERS CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie EJECTOR PINS 1 + 2-PIECE 2 piece 2 piece Carbide-tipped annular cutter, Weldon shank, drill depth 110 mm | 4" * With Weldon 32 mm special price as long as available Attention: The inch sizes do not correspond exactly to the mm diameters. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron Hastelloy, Inconel, exotic materials APPLICATION 1 piece Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. One-piece ejector pins see next page APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1 . Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. Packaging unit 2 pcs. Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES  Inch  Inch  Inch  Inch Cutting data Movie < 1400 N > 900 N > 10% Si HARD- LINE 110 HARD- LINE 110 11 Index 10 9 OIL 8 7 6 5 4 3 2 1