ATA International Product Catalogue

201970 201970 201427 201439 201970025 201970030 201970035 201970040 201970045 201970050 201970055 201970060 201970065 201970070 201970075 201970080 201970085 201970090 201970095 201970100 201970105 201970110 201970115 201970120 201970125 201970130 201970135 394 1 2 I 7.98 × 130 mm 1 2 E H I N H I 7.98 × 130 mm Weldon 80 mm | 3" Weldon 19 mm 3/4"  mm Art. I 11/16" 17.46 I 3/4" 19.04 I 13/16" 20.63 I 7/8" 22.22 I 15/16" 23.81 I 1" 25.40  mm Art. I 1.1/16" 26.98 I 1.1/8" 28.57 I 1.3/16" 30.13 I 1.1/4" 31.75 I 1.5/16" 33.33 I 1.3/8" 34.92  mm Art. I 1.7/16" 36.51 I 1.1/2" 38.10 I 1.9/16" 39.68 I 1.5/8" 41.27 I 1.11/16" 42.86 I 1.3/4" 44.45  mm Art. I 1.13/16" 46.03 I 1.7/8" 47.62 I 1.15/16" 49.21 I 2" 50.80 I 2.1/16" 52.38 1557 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie Carbide-tipped annular cutter, Weldon shank, drill depth 80 mm | 3" APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1 . Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. EJECTOR PINS 2-PIECE 2 piece Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron Hastelloy, Inconel, exotic materials APPLICATION It is possible to use this one-piece ejector pin in combination with tool hol- der article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Cutting data Movie Inch Inch Inch Inch Attention: The inch sizes do not correspond exactly to the mm diameters. < 1400 N > 900 N > 10% Si HARD- L INE INCH 80 HARD- L INE INCH 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1