ATA International Product Catalogue

201285 201285 201427 201439 201285018 201285019 201285020 201285021 201285022 201285023 201285024 201285025 201285026 201285027 201285028 201285029 201285030 201285032 201285033 201285035 201285036 201285038 201285040 201285045 201285050 414 1 2 I 7.98 × 130 mm 1 2 Weldon Weldon 19 mm 3/4" 80 mm | 3" I 7.98 × 130 mm Art.  mm I 18 45/64" I 19 3/4" I 20 25/32" I 21 53/64" I 22 55/64" I 23 29/32" Art.  mm I 24 15/16" I 25 63/64" I 26 1.1/32" I 27 1.1/16" I 28 1.7/64" I 29 1.9/64" Art.  mm 1 0 I 30 1.3/16" 1 0 I 32 1.17/64" 1 0 I 33 1.19/64" 1 0 I 35 1.3/8" 1 0 I 36 1.27/64" 1 0 I 38 1.1/2" Art.  mm 2 128 040 I 40 1.37/64" 2 128 045 I 45 1.49/64" 2 128 050 I 50 1.31/32" 1558 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie It is possible to use this one-piece ejector pin in combination with tool hol- der article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 2-PIECE APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1 . Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. 2 piece HSS-XE + DURABLUE-coated annular cutter, Weldon shank, drill depth 80 mm | 3" Further  see Art. 20 1650 page 384 ∙ Attention: The inch sizes do not correspond exactly to the mm diameters. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Hardox 400, 450  Inch  Inch  Inch  Inch Cutting data Movie < 1100 N < 900 N > 10% Si BLUE-DRILL LINE 80 BLUE-DRILL LINE 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1