ATA International Product Catalogue

201925 201925 201427 201439 201925025 201925030 201925035 201925040 201925045 201925050 201925055 201925060 201925065 201925070 201925075 201925080 201925085 201925090 201925095 201925100 201925105 201925110 201925115 201925120 201925125 201925130 201925135 432 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm Weldon Weldon 19 mm 3/4" 80 mm | 3"  mm Art. I 11/16" 17.46 I 3/4" 19.04 I 13/16" 20.63 I 7/8" 22.22 I 15/16" 23.81 I 1" 25.40  mm Art. I 1.1/16" 26.98 I 1.1/8" 28.57 I 1.3/16" 30.13 I 1.1/4" 31.75 I 1.5/16" 33.33 I 1.3/8" 34.92  mm Art. I 1.7/16" 36.51 I 1.1/2" 38.10 I 1.9/16" 39.68 I 1.5/8" 41.27 I 1.11/16" 42.86 I 1.3/4" 44.45  mm Art. I 1.13/16" 46.03 I 1.7/8" 47.62 I 1.15/16" 49.21 I 2" 50.80 I 2.1/16" 52.38 1558 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie HSS-XE annular cutter, Weldon shank, drill depth 80 mm | 3" APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1 . Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. EJECTOR PINS 2-PIECE 2 piece Attention: The inch sizes do not correspond exactly to the mm diameters. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool hol- der article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Hardox 400, 450 Cutting data Movie Inch Inch Inch Inch < 900 N < 900 N < 10% Si GOLD-DRILL LINE INCH 80 GOLD-DRILL LINE INCH 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1