ATA International Product Catalogue

201460 201460 201261 201460016 201460017 201460018 201460019 201460020 201460021 201460022 201460023 201460024 201460026 201460027 201460028 201460029 201460030 201460031 201460032 201460033 201460034 201460035 201460036 528 Weldon Weldon 19 mm 3/4" 30 mm | 1" I 6.34 × 77 mm Art.  mm % 16 5/8" % 17 43/64" % 18 45/64" % 19 3/4" % 20 25/32" % 21 53/64" Art.  mm % 22 55/64" % 23 29/32" % 24 15/16" % 26 1.1/32" % 27 1.1/16" % 28 1.7/64" Art.  mm % 29 1.9/64" % 30 1.3/16" % 31 1.7/32" % 32 1.17/64" % 33 1.19/64" % 34 1.11/32" Art.  mm % 35 1.3/8" % 36 1.27/64" 1558 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie HSS-XE annular cutter, Weldon shank, drill depth 30 mm | 1" For all rail types up to 1100 N (UIC 60). Rails APPLICATION Alternative article  13.5mm see Art. 20 1430 p.  532 + adapter, Art. 20 1284 p.  524, Art. 20 1306 p.  520 ∙ Attention: The inch sizes do not correspond exactly to the mm diameters. PROPERTIES Seven different cutting geometries optimally adapted to the different diameter and drill depths leads to high performance cutting results. Only a few manufacturers are ca- pable of producing step-hardened annular cutters. For Karnasch this is 'standard'. We produce extreme- ly hard tooth tips (68 HRC) and yet a flexible annular cutter. Completely made 'FULLY GROUND'. This refining increases the cutting ability while reducing friction at the same time. For an extended lifetime. Made of high-alloyed HSS-XE spe- cial steel. For extreme hardness at the tip of the tooth (up to 68 HRC). Thus guaranteeing a high wear resistance and lifetime. SOFT HARD HSS-XE EJECTOR PINS Packaging unit 2 pcs. ACCESSORIES % Sale item. While stocks last. Cutting data Movie  Inch  Inch  Inch  Inch SILVER-DRILL L INE RAIL 30 SILVER-DRILL L INE RAIL 30 11 Index 10 9 OIL 8 7 6 5 4 3 2 1