ATA International Product Catalogue

201020 201020 201404 201523 201114 201116 600 12 mm 15/32" I I I I 6 × 47 mm 8 × 53 mm HOLE SAWS CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie Handheld machines Maximum recommended  180 mm Maximum recommended cutting depth 6 mm Maximum possible cutting depth 12 mm Stationary and core drilling machines Maximum recommended  200 mm Maximum recommended cutting depth 8 mm Maximal mögliche Schnitttiefe 12 mm PROPERTIES APPLICATION HEXAGON SCREW FOR FIXING THE CENTER DRILL CENTER DRILL WITH SPRING = For hole saws  14-150 mm For hole saws  14-150 mm For hole saws  155-200 mm = For hole saws  155-200 mm Tapered center drill for centering without running off. Center punching not necessary. Ejector spring Shank  14-69 mm = 10 mm  70-200 mm = 13 mm Smooth running version specifically for portable machines (of course, also to be used for stationary machines) Because thin cutting width of only 1.8-2.0 mm: → Low cutting pressure → fast, smooth-running drilling → excellent guidance and control during drilling →  Quick removal of drilled core through ejector spring for all hole saws. (If drilling maximum cutting depths please remove the ejector spring) Application note: At thicker materials: Cut 2-3 mm per cutting process, remove chips afterwards. Use only good cutting oil for metal (see from page 1363  14-150 mm = 1.8 mm  155-200 mm = 2.0 mm Cutting width Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Sandwich materials Grey cast iron Carbide tipped hole saw, drill depth 12 mm | 15/32". Completely with shank, center drill and ejector spring Spare parts for Carbide tipped hole saw, drill depth 12 mm | 15/32". < 1400 N > 900 N > 10% Si M6 x 8 M8 x 8 EASY-CUT 5 EASY-CUT 5 11 Index 10 9 OIL 8 7 6 5 4 3 2 1