ATA International Product Catalogue

201025 201025 210035 210034 602 I I 4 × 41 mm 8 mm 5/16" HOLE SAWS CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie APPLICATION HEXAGON SCREW FOR FIXING THE CENTER DRILL M5 × 5 CENTER DRILL WITH SPRING 1.8 mm Cutting width Ejector spring Shank Hex shank 6.3 mm 1/4" PROPERTIES Handheld machines Maximum recommended  38 mm Maximum recommended cutting depth 5 mm Maximum possible cutting depth 8 mm Extra smooth running version specifically for cordless drills (Of course also suitable for electric power tools) Because thin cutting width of only 1.8 mm and 3 teeth technology → Very little cutting pressure for long battery life. →  Fast and smooth running drilling of all diameters even with a limited battery power. → Excellent guidance and control during drilling. →  Quick removal of drilled core through ejector spring for all hole saws. (If drilling maximum cutting depths please remove the ejector spring) Application note: At thicker materials: Cut 2-3 mm per cutting process, remove chips afterwards. Use only good cutting oil for metal (see from page 1363) Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Sandwich materials Grey cast iron Carbide tipped hole saw, drill depth 8 mm | 5/16". Completely with shank, center drill and ejector spring Spare parts for Carbide tipped hole saw, drill depth 8 mm | 5/16". Tapered center drill for centering without running off. Center punching not necessary. < 1400 N > 900 N > 10% Si EXTRA EASY-CUT 3 EXTRA EASY-CUT 3 11 Index 10 9 OIL 8 7 6 5 4 3 2 1