ATA International Product Catalogue

213019 213022 210037 210040 210038 210039 636 I I I I I I 6 mm 15/64" 8 mm 5/16" 10 mm 25/64" 10 mm 25/64" 8 mm 5/16" 6 mm 15/64"  4 - 14 mm  3/16" - 9/16"  8 - 20 mm  5/16" - 13/16"  16 - 30.5 mm  11/16" - 1.3/16"  16 - 30.5 mm  11/16" - 1.3/16"  8 - 20 mm  5/16" - 13/16"  4 - 14 mm  3/16" - 9/16" 60 mm | 2.23/64" 62 mm | 2.7/16" 72 mm | 2.53/64" 72 mm | 2.53/64" 62 mm | 2.7/16" 60 mm | 2.23/64" 3/16" 5/16" 5/16" 3/16" 7/16" 9/16" 9/16" 7/16" 5/16" 7/16" 7/16" 5/16" 9/16" 13/16" 13/16" 11/16" 11/16" 11/16" 13/16" 13/16" 15/16" 15/16" 1.1/16" 1.1/16" 1.3/16" 1.3/16" 11/16" 9/16" 1584 CONTACT INFORMATION For more information please call +353 49 435 2138 or send an email to ask@atagroup.ie TUBE AND SHEET DRILLS CBN GROUND · 2 CUTTING STRAIGHT FLUTED WITH SPLIT POINT Maximum cutting depth 4 mm Maximum cutting depth 4 mm Maximum cutting depth 4 mm Maximum cutting depth 4 mm Maximum cutting depth 4 mm Maximum cutting depth 4 mm Alu Alu Steel Steel Stainless Stainless Copper, brass, tin Copper, brass, tin Plastics GRP/CRP Plastics GRP/CRP Grey cast iron Grey cast iron APPLICATION APPLICATION HSS-XE steel + TiN-GOLD-coated Made of high-alloyed special steel 'XE' for considerably longer ser- vice life than HSS-Steel. TiN-GOLD-coating for a further substantial increase in service life also when machining dry (no/less cooling). Flute 1 is marked with metric diameters. Flute 2 is marked with inch diameters. Note: In conversion with Inch marking. If absolutely needed please ask in advance if already available. PROPERTIES Cutting data Movie PROPERTIES HSS-XE steel Made of high-alloyed special steel 'XE' for considerably longer service life than HSS-Steel. Flute 1 is marked with metric diameters. Flute 2 is marked with inch diameters. Note: In conversion with Inch marking. If absolutely needed please ask in advance if already available. < 1100 N < 900 N < 900 N < 600 N > 10% Si > 10% Si 11 Index 10 9 OIL 8 7 6 5 4 3 2 1