ATA International Product Catalogue

402060030 402060040 402060050 402060060 402060080 402060100 402060120 402070040 402070050 402070060 402070080 402070100 402070 402060 729 l1 l2 d2 d1 d3 l3 l1 l2 d2 d1 d3 l3 STUB SUBLAND DRILLS PROPERTIES Use: For through holes for screws DIN-ISO 273 and countersinks to DIN 74, sheet 1 form A, medium grade. For screws to ISO 2009, 2010, 7047 (DIN 963, 964, 966). Especially suitable for holes with simultaneous countersinking in profile material. HSS-XE steel + TITAN-TEC coated Made of high-alloyed special steel 'XE' for considerably longer service life than HSS-steel. TITAN-TEC coating for a further substantial increase in service life also when machining dry (no/less cooling) For countersinking in materials: • High-alloyed chromium steel such as stainless (V2A / V4A) • Acid resistant steel • Steel • Cast iron • Non ferrous metals Use: Hole and countersink are produced in one operation and precise- ly aligned. Therefore very sturdy and tight concentricity tolerances. Particulary suitable for NC machines due to high positional accuracy, excellent centering properties and great sturdiness. The preceding cen- tering operation can thus often be omitted. For thread tapping drill holes to DIN 336 sheet 1 with 90° countersink. In the following operation, the tap therefore does not have to cut into the sharp edge of the hole Through hole with counterbore for screw head drilled in one operation. 1583 Cutting data Movie Art. For thread  d1 h8 mm d2 h8 mm d3 h8 mm L3 mm L2 mm L1 mm M 3 I 2.5 3.4 3.4 8.8 20.0 52.0 M 4 I 3.3 4.5 4.5 11.4 24.0 58.0 M 5 I 4.2 5.5 5.5 13.6 28.0 66.0 M 6 I 5.0 6.6 6.6 16.5 31.0 70.0 M 8 I 6.8 9.0 9.0 21.0 40.0 84.0 M 10 I 8.5 11.0 11.0 25.5 47.0 95.0 M 12 I 10.2 13.5 13.5 30.0 54.0 107.0 Art. For thread  d1 ± 0.05 mm d2 h8 mm d3 h9 mm L3 mm L2 mm L1 mm M 4 I 4.3 8.6 8.6 30.0 55.0 110.0 M 5 I 5.3 10.4 10.4 30.0 55.0 110.0 M 6 I 6.4 12.4 12.4 30.0 55.0 110.0 M 8 I 8.4 12.5 16.4 30.0 70.0 110.0 M 10 I 10.5 12.5 20.4 30.0 70.0 110.0 HSS-XE + TITAN-TEC stub subland drill with long drilling step for through holes HSS-XE + TITAN-TEC stub jobber drills for tapping holes, 90° countersink Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION TITAN- TEC coated TITAN- TEC coated KARNASCH NORM < 900 N < 900 N > 10% Si HSS- XE HSS- XE DIN 1897 118 ° 118 ° Z 2 Z 2 90º 90º l3 11 Index 10 9 OIL 8 7 6 5 4 3 2 1