ATA International Product Catalogue

749 Inox Cut Steel Cut Very Fine Diamond Cut Coarse Cut Alloy Specific Cut Base Metal Cut Diamond Cut G2000 Crosscut 814-819 806-812 836-840 820-825 826-831 842 OVERVIEW OF THE SPECIAL CUTS • Excellent control (also at difficult to reach positions) – Smooth operation · Short chips · Good surface finish • Extremely fine cutting action with good control • For all kinds of steel: – Up to extra hard steel approx. 70 HRC – Heat-resistant substances, such as nickel based + cobalt based alloys • Deburring, milling, cleaning, finishing. • Non-ferrous light metals: brass, copper, zinc • Plastics • Hard Rubber The geometry has been specifically designed for use on Ni-Alloys & Ti-Alloys. Our new alloy specific bur geometry offers: • Advanced cutting geometry, allowing for increased stock removal · Improved surface finish · Increased tool life · Controlled cutting action • High performance grinding - ensuring production savings and reduced downtime · CNC Machined - high consistent quality • A smoother grinding operation · Increased productivity • High cutting action through cross cutting style – Smooth operation · Short chips • For use on all ferrous metals such as: –  Cast iron – Steel < 60 HRC · Low carbon steels – Titanium alloys • Also copper, brass, bronze • Fine deburring, fine finishing · Ferrous metals • Fibreglass • Hardened steel >45HRc • High temperature-resistant metals: nickel, cobalt. • Design for aerospace • Good finish & high stock removal • Specific rake angle • Outperform standard cuts in complex alloys • Respond to complex application • Suitable for very hard material and increase life while keeping sharpness • Up to 60% higher machining output as compared to conventional cross cut. • High aggressiveness produces large chips with outstanding chip removal. • No annealing colours at the workpiece due to low heat development. Engineered for steel and cast steel. Extremely high machining output Fine cross cut style Medium stock removal Designed specifically to meet the most demanding metal finishing needs of high tech industries Engineered for use on low carbon steels, copper and brass materials. Light stock removal Design for aerospace • Deburring, milling, cleaning, finishing. • Non hardened steel <45HRc • Non-ferrous light metals: brass, copper, zinc. • Steel - Hardened >45HRc: cast iron Medium stock removal • Extremely high machining output and service life for all austenitic, rust- and acid-resilient steels. • Titanium alloy (reduce speed to avoid sparking) • High-quality surface. • No annealing colours at the workpiece due to low heat development. Designed for stainless steel AVAILABLE ON REQUEST 11 Index 10 9 OIL 8 7 6 5 4 3 2 1