108055 108056 1074 3° 0° 10° WZ WWF 3° 0° 10° 3° 8° 12° 10° CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com Angle Grinder + Brutal disposable saw blades * 0.3 mm chamfer APPLICATION Brutal disposable saw blades for sawing 'almost' any material. Ideal for construction and crafts. The low cutting width leads to little cutting wastage and cutting resistance. Therefore also ideal for battery-powered machines. Lowest tooth number: For fast cutting of all kinds of woods (also with nails, clamps, plastics, non-ferrous metals. Coarse cut. Medium tooth number: For cutting of all specified materials. Medium cutting quality (for cutting of mild steels, non-ferrous metals, we recommend the highest number of teeth). Highest tooth number: For cutting of all specified materials. Preferably for all metals like mild steels, aluminium and other non-ferrous metals. For steel, it is beneficial to work at reduced speeds (see table above). Use of cutting spray or Mecut wax increases the service life (for cutting oils, see from page 1370) 160-200 mm = 3500-3000 rpm 210-250 mm = 2800-1900 rpm 260-305 mm = 1800-1500 rpm 350-400 mm = 1500-1000 rpm Mild steel Non-ferrous materials like aluminium, copper, brass Thin iron sheets, sandwich material, composites Plastics, plexiglass, acrylics, duro- and thermoplastics Soft wood, hard wood, and exotic wood across the grain Wood with inclusions like nails, clips, concrete residues Soft wood, hard wood, and exotic wood along the grain Bonded wood, blockboard and veneer plywood, laminated wood Chipboard, hard fibre board, boards without laminate LDF, MDF, HDF Chipboard, hard fibre board, plastic-coated/veneered, MDF, HDF HPL High-Pressure-Laminate solid boards/façade panels: Trespa®, Resopal®, Duropal®, Formica®, Kronospan®, Decodur® Veneers Profiled wood Autoclaved aerated concrete blocks Mineral/acrylic bound solid boards/kitchen worktops: Corian®, Noblan®, Hi-Macs®, Staron®, Rausolid®, Varicor® Gypsum/Cement fibre boards, Rockwool, Eternit, GRP, CRP, HPL, Mineral material Blade diameter 120 mm suitable for angle grinder diameter 115-125 mm. Use in europe only permitted with protection cover (delivered completely with spindle nut, open-faced spanner, exhaust socket and operating instructions). OPTIMAL GOOD POSSIBLE > Alternate top bevel > Alternate top bevel+bevel MACHINE For portable machines, cross cut saws, panel and sizing saws, mitre saws, table and radial arms saws, battery driven saws and suitable also for so-called DRY CUTTER machines with reduced speeds such as: JEPSON, RIDGID, ELU, RYOBI... Movie CARBIDE TIPPED CIRCULAR SAW BLADES 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=