111130 1108 5 neg. 20° TFF-N 45° 0.25 45° CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com Hard plastics · Abrasive materials · Finishing-cut/Thin-cut · Negative > Triple-chip/flat tooth negative Movie MACHINE For portable circular saws, table and sizing saws, panel sizing saws, cross cut saws, cordless saws. Plastics, plexiglass, acrylics, duro- and thermoplastics Mineral/acrylic bound solid boards/kitchen worktops: Corian®, Noblan®, Hi-Macs®, Staron®, Rausolid®, Varicor® HPL High-Pressure-Laminate solid boards/façade panels: Trespa®, Resopal®, Duropal®, Formica®, Kronospan®, Decodur® Gypsum/Cement fibre boards, Rockwool, Eternit, GRP, CRP, HPL, Mineral material Thin iron sheets, sandwich material, composites Thin profiles made of non-ferrous materials like alu, copper, brass OPTIMAL GOOD POSSIBLE APPLICATION Due to special carbide / tooth geometry excellent for finishing cuts in thin plates and profiles made of hard plastics (thermoplastics) such as: PVC, PE, PA, ABS, PS, POM PC, PMMA e.g. hollow section boards of PMMA (acrylic glass). Also good for abrasive, heavy machining and abrading materials such as: GRP, CRP, fibre cement panels, gypsum, fibre boards, eternit. Also excellent for sandwich materials with thin layers. Maximum layer thickness for non-ferrous metals / plastics = 1.0 mm Maximum layer thickness iron sheet metal = 0.3 mm Excellent also for thin profiles up to 1 mm thickness made of non-ferrous metal such as aluminium, copper, brass. CARBIDE TIPPED CIRCULAR SAW BLADES 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=