55000 55001 55002 1246 5° 35° γ α ▲ ▲ ▲ ▲ 15° 10° γ α ▲ ▲ ▲ ▲ 15° 15° 10° 10° γ γ α α ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ BW C A B CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com DIN 1837A blades come with fine teeth and tooth shape form A. Main field of application: – This shape is mostly used for fine slotting and cutting works (micro-mechanics and jewellery). – Excellent also for screw slotting. – For cutting and slotting thin walled profiles and short chipping workpieces made of steel, cast iron, non-ferrous metals, plastics. Maximum recommended cutting depth approx. 3 mm DIN 1838B blades come with rough teeth and tooth form B. Main field of application: – The most widely used universal tooth formation for slotting and cutting thick walled profiles and solid material from 3 mm. – In general for cutting long chipping workpieces made of steel, cast iron, non-ferrous metals. DIN 1838C blades come with rough teeth and tooth form B additionally, depending on the diameter, alternative top beveled (tooth shape BW) or with precut and finishing cut tooth (tooth shape C). This tooth forms reduce cutting forces and thus allow a significantly increased cutting performance compared to DIN 1838B Main field of application: – For slotting and cutting thick, up to very thick profiles from 3 mm. – Especially excellent for cutting solid material from 3 mm. – In general for slotting and cutting long chipping workpieces made of steel, cast iron, non-ferrous metals. METAL CIRCULAR SAW BLADES ACCORDING DIN 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=