KA35 SILVER-MAG ∙ TWIN SLIDE 208013 218013 228013 1291 1 = 450 rpm 12-35 mm 5/32"-1.3/8" 3-18 mm 3/16"-45/64" 10-30 mm 3/8"-1.3/16" 376-501, 520-534 640 682-717 535-537, 542 110 mm 4" * I I Gear stages EUROPE-VERSION 230 VOLTS USA-VERSION 110 VOLTS UK-VERSION 110 VOLTS Special Characteristics Included Accessories – safety belt – 3 hex keys – 2 rubber seals – coolant bottle with hose Motor Power Watts 1100 Tool holder Directly Weldon 19 mm (3/4") Coolant supply Internal, automatically Stroke 120 mm up to 210 mm possible 4.23/32" up to 8.17/64" possible Voltage 230 Volts / 110 Volts Magnetic adhesion 1000 kg | 2200 lb Magnetic foot 80 × 168 mm Fixed Weight 10.50 kg 23.00 lb Thanks to the two-way sliding system, a stroke of 210 mm is possible. (Description on page 1292). The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. * The machines are supplied as standard with 55 mm cutting depth holder. Please use our 2-part pins (explanation see page 384) for cutters from 18 mm if you need cutting depth up to 110 mm. Pre-drill recommended 8 mm 275 mm Overall length 370-550 mm Overall height Overall width measured on pinion drive* 230 Volt demonstration models available. Please send an email to sales@atagarryson.com Speed full load Core drilling Twist drilling Countersinking Accessories Movie * PREMIUM 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=