1292 1 2 3 4 5 'ONLY THE BEST' This starts with the most important, THE MOTOR. Eibenstock motors 100% Made in Germany are and will remain the best choice when it comes to performance and reliability, motors with high torque and low maintenance. This goes on with the slide. Our 'HEAVY-DUTY' Twin Rail Slide System (PATENTED) is by far superior to standard dovetail slides in the points of stability and precision. Our magnetic hole cutting machines are built using robust electronic switching units with ergonomically designed switch panels. Controlled by High-tech P.C.B Electronic circuitry built with safety in mind. Each machine has interlocking systems ensuring that the magnet must be energized before the motor can be started. MAG-TEC SENSOR: The sensor detects how well the magnet is secured to the component. It is directly connected to the motor and if the sensor is illuminating 'RED', then it could be that the component is contaminated (rust, varnish residues, chips), or the material is thinner than 6 mm. In each case the machine will not switch on or if in use can switch OFF should instability occur. If the sensor is illuminating 'GREEN', the magnetic holding force is optimal and the use of the machine is safe. All models of machines are equipped with a rear stabiliser for even more holding power and stability. Removable coolant tank for external mounting with magnetic clip supplied. Coolant tank with quick release hose system and coolant fine adjustment. Well thought out and practical. Consistently 'ONLY THE BEST' 6 1 3 8 UK MADE MACHINES 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=