KA40 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL SLIDE 208021010 208021020 208021030 1298 1 = 450 rpm 12-40 mm 5/32"-1.37/64" 3-18 mm 3/16"-45/64" 10-30 mm 3/8"-1.3/16" 110 mm 4" 376-501, 520-534 640 682-717 535-537, 542 * I I Special Characteristics Motor Power Watts 1100 Tool holder Directly Weldon 19 mm Coolant supply Internal, automatically Stroke 170 mm | 6.5/8" Voltage 230 Volts / 110 Volts Magnetic adhesion 1100 kg | 2425 lb Magnetic foot 85 × 170 mm Fixed Weight 11.50 kg 25.00 lb Speed full load Gear stages EUROPE-VERSION 230 VOLTS Core drilling USA-VERSION 110 VOLTS Twist drilling UK-VERSION 110 VOLTS Countersinking Accessories Thanks to 'HEAVY-DUTY' Twin Rail Slide System easily 110 mm cutting depth possible. (Description on page 1292). * The machines are supplied as standard with 55 mm cutting depth holder. Please use our 2-part pins (explanation see page 384) for cutters from 18 mm if you need cutting depth up to 110 mm. The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. Overall width measured on pinion drive* Pre-drill recommended 8 mm Sensor 230 Volt demonstration models available. Please send an email to sales@atagarryson.com Bestseller – price reduced 280 mm Overall length 330-510 mm Overall height Movie * KA 40 BLUE-MAG ∙ SENSOR ∙ TWIN-RAI SLIDE PROFESSIONAL UK MADE MACHINES 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=