KATV140 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL SLIDE 208032010 208032020 208032030 1309 1 = 30-80 rpm 2 = 50-120 rpm 3 = 130-350 rpm 4 = 210-550 rpm I I 12-140 mm 15/32"-5.33/64" 3-50 mm 3/16"-1.31/32" 10-80 mm 3/8"-3.5/32" 6-44 mm 15/64"-1.47/64" 240 mm 9.27/32" * 641 376-501, 520-534 640 682-717 535-537, 542 EUROPE-VERSION 230 VOLTS USA-VERSION 110 VOLTS UK-VERSION 110 VOLTS Motor Power Watts 2300 Accessories in machine Adaptor weldon 32 mm to 19 mm For annular cutter 12-60 mm Morse taper 4 with weldon 32 mm (1.1/4“) For annular cutter 61-140 mm Coolant supply Internal, automatically Stroke 320 mm | 12" Voltage 230 Volts / 110 Volts Magnetic adhesion 2675 kg | 5897 lb Magnetic foot 120 × 240 mm Fixed Weight 35.00 kg 73.00 lb Special Characteristics Thanks to 'HEAVY-DUTY' Twin Rail Slide System easily 240 mm cutting depth possible (Description on page 1292). Mechanical clutch Right/left running Full wave electronic Thermal/overheat protection STOP Speed full load Gear stages Core drilling Twist drilling Countersinking Accessories Tapping Overall width measured on pinion drive* The specified maximum diameter / cutting depths of the magnetic hole cutting machines, can only be guaranteed with original Karnasch drilling tools. Pre-drill recommended 12 mm + 12 mm Sensor * The machines are supplied as standard with a 55 mm cutting depth holder. For cutting depth up to 110 mm please use our extra long holders see pages 536/537, or see our 2-part pins (explanation see page 384) for cutters from 18 mm. For cutting depth more than 110 mm please ask us. 230 Volt demonstration models available. Please send an email to sales@atagarryson.com Bestseller – price reduced Movie 556-857 mm Overall height 440 mm Overall length VARIABLE SPEED KATV 140 BLUE-MAG ∙ SENSOR ∙ TWIN-RAIL S IDE * SPECIALIST UK MADE MACHINES 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=