201121 201150 1583 596-599 610-612 POWER-MAX ALLROUND 60 ALLROUND ECO 60 SPEEDS (REV./MIN.) FOR CARBIDE-TIPPED HOLE SAWS suitable – not suitable mm Inch 18-35 36-50 51-75 76-100 101-125 126-150 20 1121 20 1150 45/64" - 1. 3/8" 1. 27/64" - 1. 31/32" 2. 1/64" - 2. 61/64" 2. 63/64" - 3. 15/16" 3. 31/32" - 4. 59/64" 4. 61/64" - 5. 29/32" Wood, chipboards, hard fibre boards 1000 900 800 700 600 500 400 300 200 150 130 100 Plastics, plexiglass, acrylics, duro- and thermoplastics 800 400 400 290 290 190 190 140 140 125 125 100 Non-ferrous materials like alu, copper, brass, tin 1500 750 750 570 570 380 380 250 250 220 220 190 Thin iron sheets, sandwich material, composites 850 450 450 300 300 210 200 150 150 127 130 100 Notes on use: • Use rotation only. Switch off impact or hammer drill • Avoid shock / impacts on the carbide tips. This leads to small carbide splinters which results to severe loss in performance • Do not tilt the hole saw in the hole • Remove the drill core after each operation. Do the same with chips and sawdust • The 68 mm hole saws with rim countersink may not be stopped before it is removed • Advance with care to prevent the cut edges tearing 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=