107001 107002 1593 1063 1064 KARNASCH HIGH-TECH THIN-CUT CIRCULAR SAW BLADES FOR STEEL AND STAINLESS STEEL Application guidelines CARBIDE TIPPED CIRCULAR SAW BLADES TiALN COATED (10 7001) These circular saw blades are used with high cutting speeds (Vc > 200m/ min) on machines such as FECEP, TAKEDA, TSUNE, NISHIJIMAX, AMADA, KASTO, BEHRINGER, KALTENBACH, MEGA, FONG HO, EVERSING and SOCO KENTAI, etc. for cutting profiles and solid material (rectangle, hexagon and round) made of steel. For cutting steel in H-shape we recommend machines such as FICEP or TAKEDA. CARBIDE TIPPED CIRCULAR SAW BLADES TiALN COATED (10 7002) These circular saw blades are used on machines such as FECEP, TAKEDA, TSUNE, NISHIJIMAX, AMADA, KASTO, BEHRINGER, KALTENBACH, MEGA, FONG HO, EVERSING and SOCO KENTAI, etc. for cutting profiles and solid material (rectangle, hexagon and round) made of stainless steel. For cutting stainless steel in H-shape, we recommend machines such as FICEP or TAKEDA. The optimal cutting speed and the feed rate for sawing stainless steel depend on the machine. For TSUNE, NISHIJIMAX, NORITAKE, AMADA, KASTO, BEHRINGER, KALTENBACH, MEGA, FONG HO, EVERSING and SOCO KENTAI we recommend Vc = 65m/min, fz = 0.03mm/tooth. For RATTUNDE, BEWO, SINICO, RAS, ADIGE, OMP we recommend Vc = 80–140m/min, fz = 0.03–0.08mm/tooth. Advantages: • Excellent cutting quality • High heat resistant by TiALN coating • Special carbide matched to the material to be cut • Optimised chip guidance through special tooth geometry with chip breaker Cooling: We recommend an oil mist system. Cutting steel: Use non-water-soluble vegetable oil like our MECUT MMKS MQL Art. 60 1154 / 60 1153 see page 1372. Sawing stainless steel: Use high viscosity, non-water-soluble mineral oil based on sulfur such as our MECUT MMKS MQL Art. 60 1163 / 60 1162 see page 1372. Sawing of non-ferrous metals: Use non-water-soluble vegetable oil with low viscosity like our MECUT MMKS MQL Art. 60 1154 / 60 1153 see page 1372. 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=