201670 201670 201427 201439 201670025 201670030 201670035 201670040 201670045 201670050 201670055 201670060 201670065 201670070 201670075 201670080 201670085 201670090 201670095 201670100 201670105 201670110 201670115 201670120 201670125 201670130 201670135 464 Nitto / Universal Nitto / Universal 19 mm 3/4" 80 mm | 3" 1 2 I 7.98 × 130 mm 1 2 E H I N H I 7.98 × 130 mm mm Art. I 11/16" 17.46 I 3/4" 19.04 I 13/16" 20.63 I 7/8" 22.22 I 15/16" 23.81 I 1" 25.40 mm Art. I 1.1/16" 26.98 I 1.1/8" 28.57 I 1.3/16" 30.13 I 1.1/4" 31.75 I 1.5/16" 33.33 I 1.3/8" 34.92 mm Art. I 1.7/16" 36.51 I 1.1/2" 38.10 I 1.9/16" 39.68 I 1.5/8" 41.27 I 1.11/16" 42.86 I 1.3/4" 44.45 mm Art. I 1.13/16" 46.03 I 1.7/8" 47.62 I 1.15/16" 49.21 I 2" 50.80 I 2.1/16" 52.38 1563 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com Carbide-tipped annular cutter, Nitto/Universal shank, drill depth 80 mm | 3" APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. EJECTOR PINS 2-PIECE 2 piece Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron Hastelloy, Inconel, exotic materials APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. Attention: The inch sizes do not correspond exactly to the mm diameters. ACCESSORIES Cutting data Movie Inch Inch Inch Inch < 1400 N > 900 N > 10% Si HARD-L INE INCH 80 HARD-L INE INCH 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=