201185N 201185N 201427 201439 201185N018 201185N019 201185N020 201185N021 201185N022 201185N023 201185N024 201185N025 201185N026 201185N027 201185N028 201185N029 201185N030 201185N032 201185N033 201185N035 201185N036 201185N038 201185N040 201185N045 201185N050 472 Nitto / Universal Nitto / Universal 19 mm 3/4" 80 mm | 3" 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm Art. mm % 18 45/64" % 19 3/4" % 20 25/32" % 21 53/64" % 22 55/64" % 23 29/32" Art. mm % 24 15/16" % 25 63/64" % 26 1.1/32" % 27 1.1/16" % 28 1.7/64" % 29 1.9/64" Art. mm % 30 1.3/16" % 32 1.17/64" % 33 1.19/64" % 35 1.3/8" % 36 1.27/64" % 38 1.1/2" Art. mm % 40 1.37/64" % 45 1.49/64" % 50 1.31/32" 1564 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com HSS-XE + DURABLUE-coated annular cutter, Nitto/Universal shank, drill depth 80 mm | 3" EJECTOR PINS 2-PIECE APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. 2 piece Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. Larger see Art. 20 1650 page 384 and Art. 20 1660 page 386 – Replacement article see Art. 20 1285N page 488, Art. 20 1650N page 456 ∙ Attention: The inch sizes do not correspond exactly to the mm diameters. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES % Sale item. While stocks last. Hardox 400, 450 Cutting data Movie Inch Inch Inch Inch < 1100 N < 900 N > 10% Si BLUE-DRILL LINE 80 BLUE-DRILL LINE 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=