201180N 201180N 201428 201399 201180N018 201180N019 201180N020 201180N021 201180N022 201180N023 201180N024 201180N025 201180N026 201180N027 201180N028 201180N029 201180N030 201180N032 201180N033 201180N035 201180N036 201180N038 201180N040 201180N045 201180N050 474 Nitto / Universal Nitto / Universal 19 mm 3/4" 110 mm | 4" 1 2 I 7.98 × 157 mm 1 2 I 7.98 × 160 mm Art. mm % 18 45/64" % 19 3/4" % 20 25/32" % 21 53/64" % 22 55/64" % 23 29/32" Art. mm % 24 15/16" % 25 63/64" % 26 1.1/32" % 27 1.1/16" % 28 1.7/64" % 29 1.9/64" Art. mm % 30 1.3/16" % 32 1.17/64" % 33 1.19/64" % 35 1.3/8" % 36 1.27/64" % 38 1.1/2" Art. mm % 40 1.37/64" % 45 1.49/64" % 50 1.31/32" 1564 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com HSS-XE + DURABLUE-coated annular cutter, Nitto/Universal shank, drill depth 110 mm | 4" APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. EJECTOR PINS 2-PIECE 2 piece Replacement article see Art. 20 1280N page 490, Art. 20 1660N page 458 ∙ Attention: The inch sizes do not correspond exactly to the mm diameters. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES % Sale item. While stocks last. Hardox 400, 450 Cutting data Movie Inch Inch Inch Inch < 1100 N < 900 N > 10% Si BLUE-DRILL LINE 110 BLUE-DRILL LINE 110 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=