201125 201125 201427 201439 201125025 201125030 201125035 201125040 201125045 201125050 201125055 201125060 201125065 201125070 201125075 201125080 201125085 201125090 201125095 201125100 201125105 201125110 201125115 201125120 201125125 201125130 201125135 480 Nitto / Universal Nitto / Universal 19 mm 3/4" 80 mm | 3" 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm mm Art. % 11/16" 17.46 025 % 3/4" 19.04 030 % 13/16" 20.63 035 % 7/8" 22.22 040 % 15/16" 23.81 045 % 1" 25.40 050 mm Art. % 1.1/16" 26.98 0 5 % 1.1/8" 28.57 060 % 1.3/16" 30.13 065 % 1.1/4" 31.75 070 % 1.5/16" 33.33 075 % 1.3/8" 34.92 080 mm Art. % 1.7/16" 36.51 085 % 1.1/2" 38.10 090 % 1.9/16" 39.68 095 % 1.5/8" 41.27 1 0 % 1.11/16" 42.86 105 % 1.3/4" 44.45 10 mm Art. % 1.13/16" 46.03 15 % 1.7/8" 47.62 120 % 1.15/16" 49.21 125 % 2" 50.80 130 % 2.1/16" 52.38 135 1564 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com HSS-XE + DURABLUE-coated annular cutter, Nitto/Universal shank, drill depth 80 mm | 3" EJECTOR PINS 2-PIECE APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. 2 piece Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. Replacement article see Art. 20 1670 page 464, Art. 20 1285N page 488 ∙ Attention: The inch sizes do not correspond exactly to the mm diameters. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES % Sale item. While stocks last. Hardox 400, 450 Cutting data Movie Inch Inch Inch Inch < 1100 N < 900 N > 10% Si BLUE-DRILL LINE INCH 80 BLUE-DRILL LINE INCH 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=