201625 201625 201427 201439 201625025 201625035 201625040 201625045 201625055 201625060 201625065 201625070 201625075 201625080 201625085 201625090 201625100 201625105 201625110 201625115 201625120 201625125 201625130 201625135 496 Nitto / Universal Nitto / Universal 19 mm 3/4" 80 mm | 3" 1 2 I 7.98 × 130 mm 1 2 I 7.98 × 130 mm mm Art. I 11/16" 17.46 I 13/16" 20.63 I 7/8" 22.22 I 15/16" 23.81 I 1.1/16" 26.98 I 1.1/8" 28.57 mm Art. I 1.3/16" 30.13 I 1.1/4" 31.75 I 1.5/16" 33.33 I 1.3/8" 34.92 I 1.7/16" 36.51 I 1.1/2" 38.10 mm Art. I 1.5/8" 41.27 I 1.11/16" 42.86 I 1.3/4" 44.45 I 1.13/16" 46.03 I 1.7/8" 47.62 I 1.15/16" 49.21 mm Art. I 2" 50.80 I 2.1/16" 52.38 1564 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com HSS-XE annular cutter, Nitto/Universal shank, drill depth 80 mm | 3" APPLICATION EJECTOR PINS 2-PIECE Application: Insert piece 1 into the annular cutter shank. Push piece 2 onto part 1. Drill as deep as 50 mm cutting depth. Then remove piece 2 and continue drilling. Why use 2-part ejector pins? Usually, standard morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used (e.g. as on pages 536–537 Art. 20 1842, 20 1291, 20 1843, 20 1845, 20 1846), you need for drill depths above 50 mm 2-part ejector pins. EJECTOR PINS 2-PIECE 2 piece Replacement article Art. 20 1925 page 432 with suitable adaptor Art. 20 1314 + ejector pin Art. 20 1436, page 433 ∙ Attention: The inch sizes do not correspond exactly to the mm diameters. Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION It is possible to use this one-piece ejector pin in combination with tool holder article 20 1842, 20 1291, 20 1843, 20 1845, 20 1846 (see pages 536–537). You can drill as deep as 110 mm in one working process without changing. Robust and easy. EJECTOR PINS 1-PIECE 1 piece Packaging unit 2 pcs. Packaging unit 2 pcs. ACCESSORIES Hardox 400, 450 Cutting data Movie Inch Inch Inch Inch < 900 N < 900 N < 10% Si GOLD-DRILL LINE INCH 80 GOLD-DRILL LINE INCH 80 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=