201306 201306 201261 201306018 201306019 201306020 201306021 201306022 201306023 201306024 201306025 201306026 201306027 201306028 201306029 201306030 201306031 201306032 201306033 201306034 201306035 201306036 201306038 520 Weldon Weldon 19 mm 3/4" 30 mm | 1" I 6.34 × 77 mm Art. mm I 18 45/64" I 19 3/4" I 20 25/32" I 21 53/64" I 22 55/64" I 23 29/32" Art. mm I 24 15/16" I 25 63/64" I 26 1.1/32" I 27 1.1/16" I 28 1.7/64" I 29 1.9/64" Art. mm I 30 1.3/16" I 31 1.7/32" I 32 1.17/64" I 33 1.19/64" I 34 1.11/32" I 35 1.3/8" Art. mm I 36 1.27/64" I 38 1.1/2" 1563 ANNULAR CUTTERS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com For all rail types up to 1100 N (UIC 60). PROPERTIES Karnasch carbide tipped annular cutters (HARD-LINE) are made with a conical helix for: clean chip flow and highest cutting ability even with difficult materials. Karnasch carbide tipped annular cutters (HARD-LINE) are made in an elaborate pre-/ intermediate-/after-cutting geometry This results in: clatter-free, silent and easy cutting with highest lifetimes. The cutting angles are optimised for drilling in rails. Karnasch carbide tipped annular cutters (HARD-LINE) are exclusively equipped with Sandvik carbide teeth. Our opinion is: Only the best carbide is good enough for Karnasch annular cutters. Carbide-tipped annular cutter, Weldon shank, drill depth 30 mm | 1" Rails APPLICATION Attention: The inch sizes do not correspond exactly to the mm diameters. EJECTOR PINS Packaging unit 2 pcs. ACCESSORIES Cutting data Movie Inch Inch Inch Inch RAIL-LINE 30 RAIL-LINE 30 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=